Activated carbon powder grinder series and the industrial use of Activated carbon :
CLIRIK Activated carbon powder grinder series granularity (or final size) of the finished products can be freely adjusted between 325-3000meshes (0.045-0.0057mm), and the capacity (ton/hour) ranges from 0.4T/H to 12T/H.
Activated carbon is also called active carbon，activated charcoal. It Is black powder or granular amorphous carbon. Sexual carbon is widely used in the water for living, industrial water and wastewater purification and the depth of the gas phase adsorption, such as petroleum chemical industry, power plant, food and beverage, sugar drinks, medicine, fish etc water purification treatment, can absorb water free chlorine, phenol, sulfur and other organic pollution characteristic, especially the mutagenic content (THM) precursor to filter subtraction to smell. Also can be used in the workshop tail gas purification, solvent filtration, decoloring, purification, gas desulfurization, oil catalytic reforming, gas separation, variable pressure adsorption, air drying, food preservation, gas mask, solution medium carrier, organic solvent recovery; Precious metal refining; Chemical industry of the catalyst and catalyst carrier and so on function.
Working principle of Activated carbon powder grinder series:
HGM series Activated carbon powder grinder series mainly consist of main unit, classifier, powder collector, dust cleaner, blower, muffler, sound-proof room, crusher, bucket elevator, storage hopper, and vibrating feeder.
After crushed by hammer crusher, the large materials become small ones and are sent to storage hopper by elevator, and then evenly sent to the upper distribution plate of the turnplate by vibrating feeder and sloping feeding pipe.
When the Activated carbon powder grinder series is at work, all the grinding rollers are rolling in the ring, and the materials are driven to the edge of the turnplate by the centrifugal force and fall down into the grinding chambers where the materials are repeatedly pressed, crushed and grinded by the rollers.
The high-pressure air blower constantly inhales air within the Activated carbon powder grinder series and, in turn, the airflow with crushed materials are brought to the classifier whose high-speed impeller will screen the airflow: the unqualified particle size will fall and return to the mill for being reground while the qualified particle size mixed with air will go into the cyclone powder collector. Most of the qualified powders will fall and exit from the discharging valve at the bottom; a small proportion of the fine powders, with airflow, moves to the dust cleaner, and clings to the surface of the filter bags. At the same time, the fine powders clinging to the surface fall down by the sudden vibration of the filter bags, which is caused by the instantly ejected high-pressure gas controlled by the pulse valve. The materials from the above two lots are sent by the conveyor at the bottom to get finished powders packed. In addition, filtered clean air will be emitted from the air outlet of muffler in the end.
Technical data of Activated carbon powder grinder series:
There are five models of our Activated carbon powder grinder series: HGM80(HGM 8021), HGM90(HGM9024), HGM100(HGM10027), HGM100A( HGM10036),and the new type HGM125. The detailed specification and technical data of our Activated carbon powder grinder series are as below:
| Model | HGM80 | HGM90 | HGM100 | HGM100A | HGM125 |
| Ring Diameter(mm) | 800 | 930 | 1035 | 1035 | 1300 |
| Ring Number (PCS) | 3 | 3-4 | 3 | 4 | 4 |
| Roller Number(PCS) | 21 | 24-32 | 27 | 34-36 | 40-44 |
| Main Shaft Speed (r. p. min) | 230-240 | 200-220 | 180-200 | 180-200 | 135-155 |
| Input Size (mm) | ≤20 | ||||
| Finished Size (um) | 5-47(325-2500) | ||||
| Capacity (t/h) | 0.5-4.5 | 0.6-6.5 | 0.7-7 | 1-8.5 | 1.5-12 |
| Outlet Size L*W*H (m) | 13.9*4*6.2 | 14.7*4.8*7.2 | 18*4.6*8.6 | 18*4.6*8.6 | 14*9*10.25 |
| Motor powder (KW) | 145-165 | 185-204 | 263 | 263-290 | 380-430 |
Note: This specification is just referencing, any changes are subject to the products.
Features of Activated carbon powder grinder series:
1. High efficiency
Under the same final size and power, the product capacity of Activated carbon powder grinder series is twice than jet mill and agitation mill.
2. Longer lifetime of spare parts
The roller and ring are made of special material, which improve the grinding efficiency a lot. For same material and final size, the lifetime of its wearing parts can reach to more than one year, about 2-5 times as long as that of vertical shaft impact crusher and turbo-mill. Especially when handling calcium carbonate and calcite, the lifetime can reach 2-5 years.
3. High safety and reliability:
There are no rolling bearings and bolts in grinding cavity, so problems caused by bolts shedding or wear of bearings and seal components will never happen.
4. High fineness of products
The product fineness can reach D97≤5μm.
5. Environment friendly
The application of pulse dust collector and muffler reduce the pollution and noise of the dust, which has reached national environment protection standard.
Shanghai clirik machinery co., LTD.
Should you have any questions on our powder grinder; micro powder grinder; industrial powder grinder; fine powder grinder; powder grinder series; powder grinder machine.please do not hesitate to contact us.
Phone: 0086-21-20236178;86-18918057603
Contact person: lily wang
Email:sales@clirik.com; lilywang@clirik.com
Online consulting: http://www.saico.net ;http://www.grinding-equip.com;
http://www.powder-grinder.com;http://www.powder-mill.net;http://www.fine-mill.net
Address: No.19 Fuqing Rd, Pudong New Area, Shanghai201201, China.
